Skip to product information
1 of 6

HollyHoop

2-cylinder 4-stroke water-cooled gasoline engine

2-cylinder 4-stroke water-cooled gasoline engine

Regular price $1,319.00 USD
Regular price $1,319.00 USD Sale price $1,319.00 USD
Sale Sold out
Tax included.

2-cylinder 4-stroke water-cooled gasoline engine

Video of this product

 

Vintage engine:

1. This is a vertical two-cylinder gasoline engine with an antique appearance and a mechanical speed controller that allows the engine to stabilize the speed set.
2. The engine is equipped with water cooling, cooling radiator, water pump and fan. Equipped with an ignition system and powered by 4.5 V (3 AA batteries).
3. It is a perfect mechanical craft made of brass and stainless steel. The product is assembled on a wooden base and ready to work. Adding fuel to the work, its good characteristics will pleasantly surprise you.

Getting started:
1. Check the motor wiring under the wooden base, then connect the oil tank and oil tube and install 3 AA batteries (4.5V).

2. Fill the oil tank with 95 gasoline. After refueling, turn the flywheel clockwise on the right side of the engine (the surface of the power switch) for several turns so that the mixed fuel completely enters the cylinder and makes sure that there is no air in the fuel tube.

3. Turn on the power switch, then quickly turn the flywheel clockwise to start the engine to its right.

Note:
1. You need to add some water to the water tank after the engine starts, as the water will enter the cylinder to fill the space after operation, and the water path in the cylinder will return to the water tank through the pipe.
2. If the ignition device is normal and the compression in the cylinders is normal and the car cannot start properly, it is probably necessary to adjust the carburetor needle.
3. After tightening the carburetor needle, loosen it by 1/4 turn and start the flywheel so that the ratio of the gasoline and air mixture reaches the normal working ratio.
4. Turn off the power when the machine stops working.
5. It is a perfect gift for car and model lovers, and he will spend his free time with you. It can serve as a collection or a gift for Christmas and birthday.

Technical specifications:
Material: Brass/Stainless Steel/Wood
Overall dimensions: 200 x 120 x 210 mm
Engine dimensions: 180 x 180 x 100 mm.
Wooden base Dimensions: 200 x 120 x 30 mm. Weight
: 2500 g .
Working volume: 5 cm3.
Cylinder diameter: 13 mm.
Piston stroke: 20 mm. : 20 x 12 x 21 cm . Product weight: 2500 g. Package dimensions: 25 x 25 x 25 cm. Package weight: 2800 g. Packing: carton.


Package contents:
1 * Internal Combustion engine model

View full details